关于ROS软路由-HTB分层控制问题 （标记+Queue Tree） 问题如下

sunlight9501

不解，在线等！

jqkyp

在queue tree中把parent=global-out试下

平原信息港

标记错误了吧。标记下载是不是用目标地址好些？

fantom996

prerouting链用在目标地址？ 能捕获到数据么？ 数据流是定义在网卡上的！   我的标记是应该没错 求高人指点

falldog

很高兴为我解答！ 设为global-out问题依然存在 没效果！

lrwqq

你只标记单个IP的下载。直接标记数所包就可以。
/ip firewall mangle
add action=mark-packet chain=prerouting comment=wd disabled=no dst-address=
    192.168.10.0/24 new-packet-mark=wangduanxz passthrough=yes
add action=mark-packet chain=prerouting comment=icmppk disabled=no
    dst-address=192.168.10.0/24 new-packet-mark=icmppk passthrough=no
    protocol=icmp
add action=mark-packet chain=prerouting comment=vip disabled=no dst-address=
    192.168.10.99 new-packet-mark=vipxz passthrough=no
add action=mark-packet chain=prerouting comment=ser disabled=no dst-address=
    192.168.10.100 new-packet-mark=fuwuqixz passthrough=no
/queue tree
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=0
    max-limit=2600k name=Download parent=global-in priority=8
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=100k
    max-limit=500k name=icmp-down packet-mark=icmppk parent=Download
    priority=1 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=800k
    max-limit=2600k name=vip-down packet-mark=vipxz parent=Download priority=
    2 queue=default
add burst-limit=0 burst-threshold=0 burst-time=0s disabled=no limit-at=1024k
    max-limit=2600k name=server-down packet-mark=fuwuqixz parent=Download
    priority=3 queue=default

64749459

1.标记链表中标记第一IP的数据（先做连接标记在做包标记）
2.标记链表中标记第二IP的数据（先做连接标记在做包标记）
3.标记链表中标记所有传输数据（先做连接标记在做包标记）
---------------------------------------------------------------------------
一.在queue tree为以上3个标记做了分层流量控制，结果如下：
1.禁用上面第三个标记、那么queue tree分层控制1和2都起作用
2.启用上面第三个标记、那么queue tree分层控制1和2都不起作用，但是3起作用
此问题在下确实难解、就是如果做了全部数据标记后、queue里的策略就死翘翘了，望高人指点，在下感激不尽！
以下为策略脚步信息：（备注：以下信息跟上面信息表达有所不同、但描述结果一样、以上表达是方便你们快速分析问题所在处）
标记内容如下：
0 chain=forward action=mark-connection new-connection-mark=icmp-con
passthrough=yes protocol=icmp

1 chain=forward action=mark-packet new-packet-mark=icmp passthrough=yes
connection-mark=icmp-con

2 chain=forward action=mark-connection new-connection-mark=vip-con
passthrough=yes src-address=192.168.10.99

3 chain=forward action=mark-packet new-packet-mark=vip passthrough=yes
connection-mark=vip-con

4 chain=forward action=mark-connection new-connection-mark=server-con
passthrough=yes src-address=192.168.10.100

5 chain=forward action=mark-packet new-packet-mark=server passthrough=yes
connection-mark=server-con

6 chain=forward action=mark-connection new-connection-mark=user-con
passthrough=yes src-address=192.168.10.0/24

7 chain=forward action=mark-packet new-packet-mark=user passthrough=yes
connection-mark=user-co
queue tree控制如下：
0 name="Download" parent=lan limit-at=0 priority=8 max-limit=2600k burst-limit=0 burst-threshold=0 burst-time=0s

1 name="UPload" parent=wan limit-at=0 priority=8 max-limit=360k burst-limit=0 burst-threshold=0 burst-time=0s

2 name="icmp-down" parent=Download packet-mark=icmp limit-at=100k queue=default priority=1 max-limit=500k burst-limit=0 burst-threshold=0 burst-time=0s

3 name="icmp-up" parent=UPload packet-mark=icmp limit-at=100k queue=default priority=1 max-limit=500k burst-limit=0 burst-threshold=0 burst-time=0s

4 name="vip-down" parent=Download packet-mark=vip limit-at=800k queue=default priority=2 max-limit=2600k burst-limit=0 burst-threshold=0 burst-time=0s

5 name="vip-up" parent=UPload packet-mark=vip limit-at=0 queue=default priority=2 max-limit=200k burst-limit=0 burst-threshold=0 burst-time=0s

6 name="server-down" parent=Download packet-mark=server limit-at=1024k queue=default priority=3 max-limit=2600k burst-limit=0 burst-threshold=0
burst-time=0s

7 name="server-up" parent=UPload packet-mark=server limit-at=0 queue=default priority=3 max-limit=512k burst-limit=0 burst-threshold=0 burst-time=0s

8 name="user-down" parent=Download packet-mark=user limit-at=0 queue=WAN-down priority=7 max-limit=0 burst-limit=0 burst-threshold=0 burst-time=0s