本帖最后由 胖虎 于 2021-5-10 07:56 编辑
Note: If using mode "superchannel", any frequency supported by the card will be accepted, but on the RouterOS client, any non-standard frequency must be configured in the scan-list, otherwise it will not be scanning in non-standard range. In Winbox, scanlist frequencies are in bold, any other frequency means the clients will need scan-list configured.
所以,frequency mode 从superchannel 改为 regulatory-domain,就可以了。ROS无线不人性化,所以参数不能乱动。如果不想改或特殊情况改不动,就要设置scanlist. |