这次实验采用两个华为AR1200路由器来组成链式网络，目的是为了实现RIP协议通信。具体方法和组网图如下所示：
路由器1的配置：
interface Eth-Trunk1 #作端口聚合配置
ip address 192.168.1.1 255.255.255.0
interface Ethernet0/0/0
undo shutdown
eth-trunk 1
interface Ethernet0/0/1
undo shutdown
eth-trunk 1
# #创建不同网段的环回接口
interface LoopBack4
ip address 192.168.40.1 255.255.255.255
interface LoopBack5
ip address 192.168.50.1 255.255.255.255
interface LoopBack6
ip address 192.168.60.1 255.255.255.255
#
rip 1 #启用rip version 2协议、向外宣告网段
undo summary
version 2
network 192.168.1.0
network 192.168.40.0
network 192.168.50.0
network 192.168.60.0
路由器2的配置：
interface Eth-Trunk1 #作端口聚合配置
ip address 192.168.1.2 255.255.255.0
interface Ethernet0/0/0
undo shutdown
eth-trunk 1
interface Ethernet0/0/1
undo shutdown
eth-trunk 1
# #创建不同网段的环回接口
interface LoopBack1
ip address 192.168.10.1 255.255.255.255
interface LoopBack2
ip address 192.168.20.1 255.255.255.255
interface LoopBack3
ip address 192.168.30.1 255.255.255.255
#
rip 1 #启用rip version 2协议、向外宣告网段
undo summary
version 2
network 192.168.1.0
network 192.168.10.0
network 192.168.20.0
network 192.168.30.0 |
不良信息举报Q:2000617|Archiver|ROS软路由论坛 ROSABC.com 网络方案网络工程交流
GMT+8, 2025-11-1 23:46 , Processed in 0.029437 second(s), 15 queries .
Powered by Discuz! X3.4
Copyright © 2001-2021, Tencent Cloud.
