MikroTik RBM33G v6.4x解决无法识别移远EC20

yuke207

1、MikroTik RBM33G 设备，无法读到PCIE EC20 4G模块，已经升级到官方最新版V6.4X；
2、MikroTik\ROS 官网说V6.37之后是支持EC20的。
3、4G 模块，可以识别到部分华为、中心的模块。已经确定所有硬件都是好的。

大家帮帮忙，需要做哪些配置，才能识别到PCEI中的EC20？

小白，请大神详细指导

4、支持模块列表：https://wiki.mikrotik.com/wiki/Manualeripherals；
5、ROS配置说：https://wiki.mikrotik.com/wiki/C ... mpatibility_details
6、

• In RouterOS v6.xx all of these modems will use PPP interface for communication, which means that maximum achievable connection speed for all of them is limited to around 35Mbps (limit of serial interface).
• In RouterOS v6.39 and newer the EC25-MiniPCIe module can be configured as a LTE Interface which can support local IP address from modem. Use this AT command to enable it and after that reset the module: at+qcfg="usbnet",1
• In RouterOS v6.42 and newer the EP06-MiniPCIe module can be configured aa a LTE interface which can support local IP address from the modem. Use this AT command to enable it and after that reset the module: at+qcfg="usbnet",1
• In RouterOS v7.xx for modems that support MBIM drivers like EC20 model, LTE interface support will be possible and it will allow to achieve full LTE connection potential.
  

To make EC20/EC21/EC25 working fine, you will need to upgrade RouterOS to version 6.37 or later.

mnina

我也正想买这个路由器