双线负载不均匀

熬死你的

我做了两条adsl负载，有时ppoe2的下载率到2M是，ppoe1才几百K，有时两条都均匀，这样正常吗？

我做了DDns，勾选了pppoe1的Add Default Route,和Use Peer DNS这两个，是不是因为勾了这两个的问题了？但是不勾这两个DDNS就会连不上的。

是不是脚本有问题了,好像这个脚本很好，但不知怎么改ＷＷＷ.kavill.com/read-htm-tid-441.html

我现在用的是这个脚本
:local assign-address
:local new-address
:local status
:local x
:set x 2
:for i from=1 to=$x do={
:set status [/interface get [/interface find name=("pppoe-out" . $i)] running]
:if ($status=true) do={
:set new-address [/ip address get [/ip address find dynamic=yes interface=("pppoe-out" . $i)] address]
:set new-address [:pick $new-address 0 ([:len $new-address] -3)]
:set assign-address [/ip address get [/ip address find dynamic=no interface=("pppoe-out" . $i)] address]
:set assign-address [:pick $assign-address 0 ([:len $assign-address] -3)]
:if ($assign-address != $new-address) do={ /ip address set [/ip address find comment=$i] address=$new-address network=$new-address broadcast=$new-address
/ip route set [/ip route find comment=$i] gateway=$new-address
/ip fir nat set [/ip fir nat find comment=$i] to-addresses=$new-address
/ip route set [/ip route find comment=$i] gateway=$new-address
}
}
}