余老师你好，怎么把4条线其中3条做pcc,剩下一条单独给服务器用 ...

聪沐苏

现在3条线做的pcc没问题，但是server好像不走pppoe-out3，我是想让它单独用pppoe-out3的，可能我脚本有问题吧

• add action=mark-connection chain=prerouting disabled=no in-interface=pppoe-out3
  
• new-connection-mark=server passthrough=yes
  
• add action=mark-connection chain=prerouting disabled=no in-interface=lan new-connection-mark=server
  
• passthrough=yes src-address-list=server
  
• add action=mark-routing chain=prerouting connection-mark=server disabled=no in-interface=lan
  
• new-routing-mark=to_server passthrough=yes src-address-list=server
  
• add action=mark-routing chain=output connection-mark=server disabled=no new-routing-mark=to_server
  
• passthrough=yes
  

复制代码

• 
  
• /ip route
  
• add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out2 routing-mark=to_conn2 scope=30
  
• target-scope=10
  
• add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out4 routing-mark=to_conn4 scope=30
  
• target-scope=10
  
• add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out3 routing-mark=to_server scope=30
  
• target-scope=10
  
• add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out1 routing-mark=to_conn1 scope=30
  
• target-scope=10
  
• add check-gateway=ping disabled=no distance=1 dst-address=0.0.0.0/0 gateway=pppoe-out4 scope=30 target-scope=10
  
• add check-gateway=ping disabled=no distance=2 dst-address=0.0.0.0/0 gateway=pppoe-out2 scope=30 target-scope=10
  
• 
  

复制代码

quqibing

这样做了之后foxmail也发不了邮件，msn是有时能登录，有时不能登录,提示:80048820

mgdong

回复 3# son

谢谢阿，你有空不？能不能详细说下怎么做呀？我是新手不太懂

p4124126642

作源地址策略，把服务器的数据单独标记为路由走一条线出去，其他的作pcc

sunnj87

回复 4# link26

余老师不在网大已经很久了···